High-output low-pressure lamps for compatible UV systems, with the full suffix, ballast, and installation requirements reviewed together.
Match the source, power, and installation.
A high-output designation is part of a lamp specification, not a universal upgrade instruction. The lamp must be appropriate for the ballast, operating conditions, controls, and mechanical assembly. Glass Automated Products quotes high-output UV lamps using the complete part identification and system information. Keep every suffix and revision in the inquiry; shortened catalog names can conceal a distinction that matters to the replacement.
Provide the original lamp marking, system model, and ballast label. Record overall length and the reference points used, envelope diameter, base shape, pin arrangement, and any keyed features. Include a photograph of the connector and support if the installation is difficult to describe. A physically matching connector does not establish that the lamp operates correctly on the installed supply or produces the required output under the system’s conditions.
For an OEM design, describe the intended optical function, duty cycle, thermal environment, source spacing, and monitoring arrangement. We can review a high-output lamp request alongside quartz sleeves, ballasts, harnesses, and controls. If a replacement is proposed as an equivalent, the relevant requirements must be compared explicitly rather than inferred from a similar name or wattage. The equipment owner remains responsible for following the system’s maintenance instructions and applicable performance requirements.
Build your specification
| Requirement | What to provide |
|---|---|
| Part identification | Full lamp number, including HO and other suffixes |
| Equipment | System model, controller revision, and ballast label |
| Mechanical | Lamp length references, envelope, bases, and pin arrangement |
| Operating | Required electrical conditions, duty cycle, and thermal environment |
| Review | Original documentation and acceptance criteria for any equivalent |
Works for
High-output UV water-treatment systems, OEM lamp assemblies, industrial equipment, and replacement inquiries for a specifically identified high-output lamp.
Questions before you order
Can I fit a high-output lamp into a standard-output system?
Do not assume that is acceptable. The source, supply, controls, thermal arrangement, and system design require a compatibility review.
Does the HO suffix matter?
It can distinguish a specific lamp type. Preserve the complete original marking and provide the system documentation when identifying a replacement.
Is wattage enough to confirm an equivalent?
No. Electrical operating requirements, geometry, base configuration, optical requirements, and the intended system also matter.
Can you help when two catalog descriptions disagree?
Yes. Send both references and the actual lamp or equipment label. Original manufacturer documentation is preferred for resolving a mismatch.
Can sleeves and connectors be supplied with the lamp?
Yes. Identify the associated components so their dimensions and interfaces can be reviewed as part of the same request.
A direct quote, starting at 1 piece.
Glass Automated Products has fabricated quartz in Huntington Beach, California, since 1998. Our in-house work includes cutting, doming, fire-polishing, grinding and finishing, cleaning, inspection, and packaging. Most specifications are quoted within one business day. There is no minimum order quantity beyond 1 piece. Fabrication timing, available documentation, and shipping are confirmed for your requirement. We ship to all 50 states and internationally.