A bank of lamps, a row of sleeves, or one damaged component: organize the replacement around the module, its cleaning system, and the plant’s maintenance plan.
Specify the complete module interface.
Wastewater and reuse installations can use open-channel modules or closed-vessel reactors. Identify which arrangement you operate before selecting a sleeve. Overall length, immersion length, mounting position, and cable or connector clearance describe different parts of the assembly. Send a module drawing or photographs that show the full component and both ends, together with the original part marking.
A sleeve that passes through a cleaning carriage must match the wiper and seal interfaces as well as the lamp. Include critical outside-diameter tolerances, any shoulders or ground features, and the specified material. Tell us if the request concerns a broken sleeve, a planned replacement interval, or deposits that remain after the manufacturer’s cleaning procedure. Those details help distinguish part identification from a process or maintenance question.
For a group replacement, list quantities by module or channel and identify any mixed equipment revisions. We can quote sleeves, lamps, power components, and accessory kits as separate line items. State the project’s replacement-part approval requirements and receiving constraints. A proposed equivalent needs review under your plant’s equipment and operating requirements before installation; an online match does not replace that review.
Build your specification
| Requirement | What to provide |
|---|---|
| Installation | Open channel or closed vessel; module identification |
| Geometry | Overall and immersion length, OD, wall, end finish |
| Cleaning assembly | Wiper fit, travel, seals, and critical surfaces |
| Electrical parts | Lamp label, supply, connector, monitoring requirements |
| Maintenance plan | Quantities by bank and required delivery date |
Works for
Open-channel UV modules, closed-vessel wastewater reactors, reuse-treatment equipment, planned lamp-bank service, and plant spare-parts inventories.
Questions before you order
Can you review an open-channel sleeve?
Yes. Include the module identification, mounting geometry, and cleaning-system details.
Can we send a maintenance bill of materials?
Yes. Keep the original part numbers and equipment revisions attached to each line.
Do deposits always mean the sleeve needs replacement?
The condition needs assessment using the equipment maker’s cleaning and inspection instructions. Cracks or damaged sealing surfaces need particular attention.
Can accessories be packed with each sleeve?
Request the kit contents and packaging arrangement in your quote.
Can you quote parts for a reuse project?
Yes. Include the project-specific acceptance and replacement-part requirements for review.
A direct quote, starting at 1 piece.
Glass Automated Products has fabricated quartz in Huntington Beach, California, since 1998. Our in-house work includes cutting, doming, fire-polishing, grinding and finishing, cleaning, inspection, and packaging. Most specifications are quoted within one business day. There is no minimum order quantity beyond 1 piece. Fabrication timing, available documentation, and shipping are confirmed for your requirement. We ship to all 50 states and internationally.