Specify the UV assembly around the installed system and its maintenance needs. We quote sleeves, lamps, electrical components, and hardware for hatchery and aquaculture equipment.
Keep the water-loop details with the part number.
Aquaculture installations can combine several treatment loops, equipment sizes, and service intervals. Identify the UV model serving each loop and include the original sleeve and lamp numbers. Tell us whether the water is fresh or saline and describe the mounting and cleaning arrangement. Those details provide context for reviewing quartz geometry and accessory materials without turning a component inquiry into an unsupported treatment-performance claim.
For a sleeve replacement, measure the outside diameter and overall length and identify whether one or both ends are open. Record any flange, shoulder, or sealing feature separately. A photograph that includes the retaining nut and seal assembly is often more informative than a close-up of the tube alone. For lamps, capture the full printed label, base, pins, and ballast label while following the equipment’s safe service procedure.
If the same facility has several models, list parts by reactor rather than buying a single visually similar replacement for all units. We can quote planned-service quantities and a separate spare set. Include the required delivery date, destination, and any labeling that will help maintenance staff assign parts correctly. Your operator or system designer remains responsible for the treatment settings and biological performance of the installation.
Build your specification
| Requirement | What to provide |
|---|---|
| System | UV model and loop or reactor identification |
| Water context | Fresh or saline; approved cleaning method |
| Sleeve | OD, wall, length, end finish, seals |
| Lamp | Full designation, base, pins, matching ballast |
| Maintenance | Service quantities, spare quantities, delivery date |
Works for
Hatchery UV units, aquaculture treatment loops, recirculating systems, lamp and sleeve service, and spare-parts programs tied to identified equipment.
Questions before you order
Can you quote for a saltwater installation?
Yes. Identify the system and specify accessory and seal materials for review.
Can a photo start the identification process?
Yes. Include the full component, both ends, and readable equipment labels.
Does a new lamp establish a treatment dose?
No. Dose depends on the system and operating conditions, which the operator or designer must assess.
Can parts be labeled by reactor?
Request the labeling and kit arrangement with the quote.
Can you quote one sleeve?
Yes. The minimum order is 1 piece.
A direct quote, starting at 1 piece.
Glass Automated Products has fabricated quartz in Huntington Beach, California, since 1998. Our in-house work includes cutting, doming, fire-polishing, grinding and finishing, cleaning, inspection, and packaging. Most specifications are quoted within one business day. There is no minimum order quantity beyond 1 piece. Fabrication timing, available documentation, and shipping are confirmed for your requirement. We ship to all 50 states and internationally.